Page 1 of 2

Replacing balls

Posted: Mon Mar 04, 2002 1:43 pm
by Slutmarco (imported)
Hi, reader!

I am a slut and get fucked on regular basis. My masters all decided that I have to give up my balls so I will not enjoy getting fucked as much as I do now. They want me to realise I'm only here to provide pleasure to every man that wants to use me as sex object, and not to get pleasure from it myself. They think I will loose my sexdrive when my balls get removed. They say that without balls I won't like to get fucked anymore and sex gets meaningliess to me. And that's where they want to have me.

But when my balls are removed, I will not look like a complere boy anymore. My masters came up with the idea to implant two steel or glass balls. These have got to be fairly large and heavy, so my ballsack will be strached and look extremely full and heavy.

Does anybody here know where i can get this done and if it's possible to refill my sack with something heavy?

You sexual toy,

Marco

(PS, if you are in the neighbourhood some time, please mail me or my masters so you can use me for sex. My mail address is marco@hot.zzn.com and my masters can me reached at hansvos@wanadoo.nl)

Re: Replacing balls

Posted: Mon Mar 04, 2002 2:36 pm
by Andrew (imported)
Hi, reader!
Slutmarco (imported) wrote: Mon Mar 04, 2002 1:43 pm But when my balls are removed, I will not look like a complere boy anymore. My masters came up with the idea to implant two steel or glass balls. These have got to be fairly large and heavy, so my ballsack will be strached and look extremely full and heavy.

Does anybody here know where i can get this done and if it's possible to refill my sack with something heavy?

Assuming this is for real, any Urologist could put in a prothesis. It's done all the time for those castrated because of testicular or prostate cancer.

📖 📖 📖

Re: Replacing balls

Posted: Mon Mar 04, 2002 3:32 pm
by inphx (imported)
Slutmarco (imported) wrote: Mon Mar 04, 2002 1:43 pm But when my balls are removed, I will not look like a complere boy anymore. My masters came up with the idea to implant two steel

here in phx i inquired once when i was getting a piercing whether the studio would implant balls into scrotum once balls are gone. they had done that before but not often. they don't remove the balls - that is your responsibility.

Re: Replacing balls

Posted: Wed Mar 06, 2002 5:11 pm
by Dave (imported)
there is a company that makes artificial testicles for dogs when you have them neutered.

Honest, I can't make this stuff up!!

They are called (Are you ready)

Neuticles

yes, neuticles . . . . . look them up on the web

Dave

Re: Replacing balls

Posted: Thu Mar 07, 2002 10:36 am
by Slutmarco (imported)
Thanks for the info, Dave!

My master found it a quite appropiate idea for me getting cattle or pet implant balls. They liked the idea of me being castrated, and having balls implanted ment for dogs, bulls or horses.

They will comtact suppliers, and have some related doctor (presumable a vet, they know a few of those) remove my balls and replace them with cattle implants.

With regards,

Slave Marco

Re: Replacing balls

Posted: Thu Mar 07, 2002 5:14 pm
by Dave (imported)
Thanks for the info, Dave!
Slutmarco (imported) wrote: Thu Mar 07, 2002 10:36 am They will comtact suppliers, and have some related doctor (presumable a vet, they know a few of those) remove my balls and replace them with cattle implants.

I would be very interested in hearing about before, during, and after.

If you really used the big nueticles I would be interested in seeing a picture.

Dave

Re: Replacing balls

Posted: Thu Mar 14, 2002 7:33 pm
by Kelly_2 (imported)
Our dear friend Robby had a post about replacing balls in mice. It was in the old EA, and has since vanished. But, I copied it before then. Here it is:

Robby (06-14-2001 09:55 p.m.):

(I don't know how they wrote this with a straight face. This apparently was a real memo sent at a computer company to its employees in all seriousness... This memo is from an unnamed computer company. It went to all field engineers about a computer peripheral problem. The author of this memo was quite serious. The engineers rolled on the floor!)

INSTRUCTIONS ON REPLACING MOUSE BALLS:

Mouse balls are now available as FRU (Field Replacement Unit). Therefore, if a mouse fails to operate or should it perform erratically, it may need a ball replacement. Because of the delicate nature of this procedure, replacement of mouse balls should only be attempted by properly trained personnel.

Before proceeding, determine the type of mouse balls by examining the underside of the mouse. Domestic balls will be larger and harder than foreign balls.

Ball removal procedures differ depending upon the manufacture of the mouse. Foreign balls can be replaced using the pop-off method. Domestic balls are replaced by using the twist-off method.

Mouse balls are not usually static-sensitive. However, excessive handling can result in sudden discharge.

Upon completion of ball replacement, the mouse may be used immediately. It is recommended each replacer have a pair of spare balls for maintaining optimum customer satisfaction.

Any customer missing his balls should contact the local personnel in charge of removing and replacing these necessary items.

Kelly :)

Re: Replacing balls

Posted: Thu Mar 14, 2002 10:52 pm
by A-1 (imported)
May I suggest that you go to the nearest amusment supply company where they lease pinball equipment.

Purchase two new shiny pinballs like they put into the machines, have them sterilized and then inserted into your scrotum.

You will be the life of the S&M set when your Master makes you do jumping jacks and your balls start clacking together and flopping up and bruising what is left of your cock. They will hang down and when you run in the nude your scrotum will beat your quadriceps black and blue.

You know, we have a cat and we put a bell on his collar. Now we know when he is coming and going. Your Master will hear you walking down the hallway to the bathroom because whenever you move your balls will clack together if your underwear is not too tight.

Of course, if I were your Master, I would not allow you to wear underwear AND I would rip the seam out of every one of your pairs of pants just so large as to allow you to pull your scrotum through. Then I would force you to push your scrotum through the hole so it would be visable at all times and to facilitate the clacking of your "PINBALLS"! 😄

Hell, they may even bruise your ass and make your asshole bleed if you run with the right step. It will be a nice tenderizer and prelude to a night of fisting!

😄 A-1😄

Re: Replacing balls

Posted: Thu Mar 14, 2002 11:02 pm
by A-1 (imported)
I kind of sound like MASTER WADDIE now.

😄 😄 😄 😄 😄 😄 😄 😄

🚬 A-1 🚬

Re: Replacing balls

Posted: Sat Mar 23, 2002 4:50 pm
by Master Waddie (imported)
MEDICAL WARNING~

Great suggestion about the pinballs A-1; however, I must point out that while it has an attraction it is medically lethal. Please, no one try to place 'pinballs' in their ball sacks. They have a nickle based chrommium alloy coating that is poisonious to the human system. I had a close friend who did that to his slave and the kid damn near died of nickle poisioning. Fortunately, I found out what he had done and we remove the

metal ones immediately.

If you just have to have big metal balls they must be surgical quality stainless steel. Now, I have seen that done with striking results. However, the slave was not castrated. They were inserted temporarily to stretch his ball sack so he could have the set of low hangers he always wanted. The metal balls were later removed just before they hung to his knee.

I sometime don't understand other Masters wanting to deny their slaves any sexual pleasure from them fucking them. I guess it's all in the way you look at it. My slave is trained to know that he's there for one purpose, my pleasure. If he should get some pleasure from it then thats his icing on the cake. Sort of like 'job perks' so to speak! Actually, my experience is, the more the slave enjoys serving it up to you the better fuck you're gonna' get. Who wants some unresponsive, ho-hum, dead piece of ass? Not me.

There use to be a company in Florida that you could buy surgical quality stainless steel balls and other body jewelry from. The name was Anchor Piercing and body jewelry. You might try looking 'em up on the internet?

Sometimes you can find industrial ball bearings that are stainless. I've found them in surplus houses. How can you tell their stainless? Carry a small magnet with you. If the magnet won't stick to the bearing, it's probably stainless.

Actually, my slave has been complaining about not having low enough hanging balls lately and I just happen to have a pair of 3/4inch stainless balls in the shop...........swing low, sweet chariot!

Master Waddie :p