TheThingy (imported) wrote: Mon Sep 28, 2015 5:14 pm Hello folks.

There is a lot of information here, but the links to products are either broken or the replies don't mention the vendors and sources to get the materials from. By going through replies in the thread, it is clear that the best is medical grade liquid calcium chloride. The problem is that I can't find it. I also noticed that it is typical to boil the liquid until one gets powder, mix it with alcohol and inject. I am wondering whether you would considering doing that with food grade calcium chloride safe, like for example in the previous page mentioned

[quote="dvdbll (imp[quote="Patri

TheThingy (imported) wrote: Mon Sep 28, 2015 5:14 pm

Frida G Cavic (imported) wrote: Tue Jul 21, 2015 1:37 pm ckchemcast (imported)" time=1428570180]
orted)" time=1363812240]
http://www.ebay.com/itm/Calcium-

chloride-33-solution-for-cheese-production-100ml-bottle-/1
[/quote]
51311652543?pt=LH_DefaultDomain_3&hash=item233ae096bf ? I don't see concrete answers. Anyone successfully used it or did you all get the real thing
[/quote]
from hell knows where?

I also haven't noticed any discussion about getting it already in powder appearance. I assume it is out of question?

Excuse me if I overlooked something.

To the best of my knowledge, I was the first to boil off the liquid from the CaCl and then mix it wit vodka. I never used anything but food grade and it worked just fine for me. My advice, disregard all those talking about medical grade CaCl as they are over complicating the entire process. Almost all of us old timers using this method, used food grade. I bought some off E bay and also when th

micdavi24 (imported) wrote: Fri Sep 05, 2014 9:01 pm is took a bit too long to arrive,

I bought another lot from a hobby cheese making store.

Honestly, the easiest way to get this stuff is in liquid form. Just look through my old posts on this thread, my process and progress is very well documented. Any further questions, feel free to PM me, but before you go ahead, be ABSOLUTELY sure that this is what you want, as once your testicles are gone, they are gone for good and you are also totally sterile. I see you are still young, so please think very carefully before you act.

Hi 6 week update .

Both still feeling numb and have developed lumps as well as shrinking. Went to see local Doc who has sent me for an ultrasound scan at the end of next week.Told him I had a fall on a fence that made both balls swell up .

Will keep you posted post ultrasound scan.

stepheniesteve

About to have my first hypertonic solution injection. So excited. Wish me luck!

why is the salt not dissolving in alcohol? or even saline solution? i couldn't pull anything the salt had blocked the needle i guess.

My cacl2 at least has arrived today!!! I´m very excited for this. It´s a powder chemicall grade, 99% purity, As propably I would face the same troubles to prepare my solution I have thoutght in some tips . Cacl2 dissolves in etanol and water.

1.-stir vigorously for several minutes until the salt is completely disolved, and before using the solution to avoid lumps and clots in the needle. Even you can shake the solution If you has prepared in a close container

2.- Use 25G needles, insulin needles may be easily blocked with lumps of salt

3.- pull back and out the plunger, before load the solution.

4.-once filled the syringe, eliminate the first drop.

5.- don´t delay too long to injecting in your testicles, because the salt tend to precipitate easily.

Frida G Cavic (imported) wrote: Tue Oct 06, 2015 5:57 pm My cacl2 at least has arrived today!!! I´m very excited for this. It´s a powder chemicall grade, 99% purity, As propably I would face the same troubles to prepare my solution I have thoutght in some tips . Cacl2 dissolves in etanol and water.

1.-stir vigorously for several minutes until the salt is completely disolved, and before using the solution to avoid lumps and clots in the needle. Even you can shake the solution If you has prepared in a close container

2.- Use 25G needles, insulin needles may be easily blocked with lumps of salt

3.- pull back and out the plunger, before load the solution.

4.-once filled the syringe, eliminate the first drop.

5.- don´t delay too long to injecting in your testicles, because the salt tend to precipitate easily.

Thank you so much that was helpful.

I emerged the process with elastrator. when i unplugged the syringe the blood exploded insanely. How to prevent that?

I would like to add that I have successfully used CaCl solution and have just been castrated

If anyone would like to know more details then I would be more than happy to help and assist

It does work if applied correctly and with some knowledge

Xx

endothermic (imported) wrote: Mon Oct 12, 2015 12:53 pm I would like to add that I have successfully used CaCl solution and have just been castrated

If anyone would like to know more details then I would be more than happy to help and assist

It does work if applied correctly and with some knowledge

Xx

I can attest to this as I also went this route successfully. Anyone who is interested can read about my progress in this thread, it is well documented.

Happy for both of you. Please elaborate.