Frida G Cavic (imported) wrote: Thu Aug 20, 2015 5:58 pm Have you been on antiandrogens before?

dou you measure the size of your testicles before the injection?

What size of needle used?

Do you mix your cacl2 with alcohol, or do you inject the pure cacl2?

your cacl2 is food grade, reagent grade?

good luck !:)

Hi, have been on spiro and depro for about a year.used a 25 gauge needle. Bought food grade 33% CaCl which I mixed with Spyritus polish vodka to get 20% injectable . Didnt measure testicles but have had them for a long time so have a fairly good idea of their size. I injected both through the bottom as per the demo on the vet website. Interestingly I have had no pain at all in the right testicle, it has all been in the left one . Both have however swollen about the same amount.I can only think I got the injection site just right for the right and not quite as good for the left. The Vet stuff suggests that the dogs dont have much discomfort so it may be that with really good injection placement there really is little or no pain.

update

day three still very swollen and hot. Pain from balls hardly worth taking any pills except there is still occasional sharp pain up into the abdomen from the left ball about once an hour. Both are very tender if handled but much less than in day 2.

Day 4. have not had a single sharp pain today. swelling down significantly in scrotum ,balls still swollen, probably twice original size, and tender to handle but clearly on an easing trajectory.Can masturbate with no problem or pain but as I had a vasectomy years ago the fluid is mostly prostate anyway.

My intention is to watch them shrink for a couple of months and if necessary give them another shot before going to medics for removal.

will keep you posted

Hi, 10 day update.

No pain, limited tenderness on manipulation.The right testicle has now shrunk to less than its original size,gone hard and has become miss -shapen .The left testicle is about the original size or slightly larger. It is more tender than the left but is starting to go hard.

looks like CaCl has done a good job..

will post any significant changes .

s

Congrats stephaniesteve

further update.

the bollocks are definitely not what they were. I often use an E Stim unit with one pad behind the balls and another on the cock head.In spite of much practise I could never stand it at full power. It was the pain in the balls that stopped me.I have just tried it on my post CaCl balls. They are much less sensitive and I can easily take full power.They are definitely going dead inside.

S

Can someone please sum up objectively the content of this topic?

I've been trying to read it, but after 5-6 pages my head starts to spin.

I'm interested in injections and Calcium Chloride seems to be the fastest and most effective way to get the doctors to act.

If I do it, I wanna do it properly. I need to know the right dosage and all the precautions. But 75 pages (plus all the links) is a bit too much for poor ol' me.

Can somebody help me?

each one have had a different reaction to cacl2 and each case can be different to another, you would need to read the 75 pages to be learnt about each case and story, At the beggining It might seem hard but don´t try to read all thread in one or two days, but you should read little by little one page a day or half page a day insteas . when you realise you will have finish all this thred!

IterViator (imported) wrote: Wed Sep 23, 2015 3:27 am Can someone please sum up objectively the content of this topic?

I've been trying to read it, but after 5-6 pages my head starts to spin.

I'm interested in injections and Calcium Chloride seems to be the fastest and most effective way to get the doctors to act.

If I do it, I wanna do it properly. I need to know the right dosage and all the precautions. But 75 pages (plus all the links) is a bit too much for poor ol' me.

Can somebody help me?

Let me also make a suggestion. Find (in this thread of 75 pages) one or two guys who succeeded being castrated with CaCl injections, and start a dialog with them. There must be someone here who's story fascinated you, so PM that guy and ask him, with respect, if he will mind becoming a mentor to you. Only be wise in choosing a man who went through his own process with utmost regards to safety regarding his actions and procedures, not driven by dangerous impulsive, sensation seeking actions.

Listen to his advice and let him know that you will at times comment here during your process to let us know how things a going, and to get a second opinion if needed.

I'm sure of it that if you ask a guy for his advice, he will help and if he doesn't know, gain advice from other guys here.​

So, choose a guy and walk a journey with him...become his padawan learner.

The CaCl process is not that difficult, but I do believe you'll need a box of strong painkillers.

It has been over five months since my surgery and it has been the best 5 months in my life. Sex is no longer on my mind 24/7 and my wife is more comfortable trying new ways to keep her self satisfied. The scars are healing and my cock is shrinking, my doctor is still pushing for me to start T injections of gel but I am not ready for that at this time. My only complaint are hot flashes at night and weight gain, gained 15 pounds since the surgery.

For those of you who are considering trying CaCl, it worked for me, I only wish I found out about this option years ago. I would have saved myself from doing some very supid things with other sex partners/strangers to satisfy my sexual needs.

Cb2000user (imported) wrote: Sun Sep 27, 2015 6:21 am For those of you who are considering trying CaCl, it worked for me, I only wish I found out about this option years ago.

I second this, I too wish I had found out about this method long ago. It is now just over 18 months since I was castrated and I can't thank Splitdick enough for starting this thread, it helped me to get done what I had wanted done for years before.

Hello folks.

There is a lot of information here, but the links to products are either broken or the replies don't mention the vendors and sources to get the materials from. By going through replies in the thread, it is clear that the best is medical grade liquid calcium chloride. The problem is that I can't find it. I also noticed that it is typical to boil the liquid until one gets powder, mix it with alcohol and inject. I am wondering whether you would considering doing that with food grade calcium chloride safe, like for example in the previous page mentioned [quote="dvdbll (imp[quote="Patri

Frida G Cavic (imported) wrote: Tue Jul 21, 2015 1:37 pm ckchemcast (imported)" time=1428570180]
orted)" time=1363812240]
http://www.ebay.com/itm/Calcium-

[/quote]

chloride-33-solution-for-cheese-production-100ml-bottle-/1
[/quote]
51311652543?pt=LH_DefaultDomain_3&hash=item233ae096bf ? I don't see concrete answers. Anyone successfully used it or did you all get the real thing from hell knows where?

I also haven't noticed any discussion about getting it already in powder appearance. I assume it is out of question?

Excuse me if I overlooked something.