Castration device

Hash (imported)
Articles: 0
Posts: 1678
Joined: Wed Mar 05, 2003 7:25 am

Posting Rank

Castration device

Post by Hash (imported) »

If they can make a better mouse trap, certainly we can devise a better castration device. I know some men have used the elastrator, however, the after effects look awful. The elastrator bunches up the skin, pulling it tight and so when it heals it leaves a nasty looking scar. What if instead, two steel bars were used and screwed tight on the scrotum, this can't be a new idea, but I haven't seen a patented device. Perhaps several screws in the middle would be necessary to ensure effectiveness. You'd just screw it tight and let it on until it falls off or once the testicles are dead, you simply slice them off. That way there would be a single mid-line scar, which I think would be aesthetically pleasing. Other than a Urologist or Plastic Surgeon, I think this would be the best. Comment? Other devices?
chilliwilli (imported)
Articles: 0
Posts: 593
Joined: Sat Feb 02, 2008 4:39 pm

Posting Rank

Re: Castration device

Post by chilliwilli (imported) »

I would imagine a better result with the elastrator could be had by bringing the band as far down on the scrotum as possible. This would allow more skin above so that it would not be so tight after the removel. One way to do this would be to decrease the girth of the testicels. A stint on androcur would decrease the size of the testes significantly and possibly allow for lower positioning of the band.🙄

This may also allow the prospective eunuch time, some understanding of his future, and put him in much better place to contimplate such a measure. All keyed up on a fantasy life as a eunuch and possibly horny to boot is not the way to go.

the disgruntled domestic

chilli-
mrsoul215 (imported)
Articles: 0
Posts: 5
Joined: Sun Mar 23, 2008 5:39 am

Posting Rank

Re: Castration device

Post by mrsoul215 (imported) »

What about just making something like a hot wire cutter that is used for cutting seat foam?...😄
JeffEunuch (imported)
Articles: 0
Posts: 435
Joined: Wed Dec 12, 2001 10:09 pm

Posting Rank

Re: Castration device

Post by JeffEunuch (imported) »

I met an eunuch on the net who said he'd sliced off his already empty sac with such a home-made device. As you say, the scar left was more acceptable to him. The main reason he did it thus was to reduce bleeding, which it aparently did.

....
Hash (imported) wrote: Sat Sep 20, 2008 11:50 am What if instead, two steel bars were used and screwed tight on the scrotum, this can't be a new idea, but I haven't seen a patented device. Perhaps several screws in the middle would be necessary to ensure effectiveness. You'd just screw it tight and let it on until it falls off or once the testicles are dead, you simply slice them off. That way there would be a single mid-line scar, which I think would be aesthetically pleasing. Other than a Urologist or Plastic Surgeon, I think this would be the best. Comment? Other devices?
Bagoas (imported)
Articles: 0
Posts: 275
Joined: Fri Sep 17, 2004 4:35 pm

Posting Rank

Re: Castration device

Post by Bagoas (imported) »

I tried the two-steel-bars device several years ago, though the screws were at the ends only. I found it to be excruciatingly painful. Though there was severe pain in the cords, the worst pain was in the scrotum. Unfortunately, I did not have access to a topical anæsthetic.

I left it on as long as I could endure it: less than an hour, and it did have a permanent effect, namely, great reduction in the sensitivity of the left testicle and possibly some softening. There was no detectable effect on the right testis, already savaged by mumps orchitis.
Kangan (imported)
Articles: 0
Posts: 1099
Joined: Fri Aug 25, 2006 11:24 am

Posting Rank

Re: Castration device

Post by Kangan (imported) »

This is exactly the sort of device that I need. The danger is that there is no way to try it out to see if it works safely. I used a homemade clamp to shut down the blood supply to my testicles (not a Burdizzo), but now I want the dead testicles removed. If part of the scrotum has to go too, then that would be acceptable as long as there was no blood loss, heavy scarring, or trips to the ER involved. Let's hear some more ideas....
Hash (imported)
Articles: 0
Posts: 1678
Joined: Wed Mar 05, 2003 7:25 am

Posting Rank

Re: Castration device

Post by Hash (imported) »

A hot wire device would prevent excessive bleeding but it would be painful too. The quicker the better, if it's only painful for a few seconds, I think that more men would use it.
coinflipper_21 (imported)
Articles: 0
Posts: 289
Joined: Thu Oct 05, 2006 3:30 pm

Posting Rank

Re: Castration device

Post by coinflipper_21 (imported) »

Hash (imported) wrote: Sat Sep 20, 2008 11:50 am If they can make a better mouse trap, certainly we can devise a better castration device. I know some men have used the elastrator, however, the after effects look awful. The elastrator bunches up the skin, pulling it tight and so when it heals it leaves a nasty looking scar. What if instead, two steel bars were used and screwed tight on the scrotum, this can't be a new idea, but I haven't seen a patented device. Perhaps several screws in the middle would be necessary to ensure effectiveness. You'd just screw it tight and let it on until it falls off or once the testicles are dead, you simply slice them off. That way there would be a single mid-line scar, which I think would be aesthetically pleasing. Other than a Urologist or Plastic Surgeon, I think this would be the best. Comment? Other devices?

I should think that the major problem with the castration devices in use today is that they were designed to castrate animals, not people. The aesthetic results of the process were considered little if at all. If some of the fanciful, clean and painless castration devices that are described in some of the stories in the archive actually existed there would probably be many more voluntary eunuchs than there are now.

I've been wanting to have my totally atrophied, non-functional testicles removed, along with the scrotum, purely for aesthetic reasons, but cannot afford what would be, totally elective, cosmetic surgery. Unfortunately, there is no current neat, clean, safe way of doing it myself.:-\
yardsale (imported)
Articles: 0
Posts: 1
Joined: Fri Sep 26, 2008 4:34 pm

Posting Rank

Re: Castration device

Post by yardsale (imported) »

Kangan,

I also clamped the cord to my one testicle (the other was surgically removed as a child). How can you tell if it's dead?

It's numb, I've lost libido, have few weak erections, but it hasn't atrophied. It's about the same size it was when I clamped it 6 months ago.

Can it be dead and still not shrink?
Kangan (imported)
Articles: 0
Posts: 1099
Joined: Fri Aug 25, 2006 11:24 am

Posting Rank

Re: Castration device

Post by Kangan (imported) »

coinflipper_21 (imported) wrote: Thu Sep 25, 2008 1:54 pm I should think that the major problem with the castration devices in use today is that they were designed to castrate animals, not people. The aesthetic results of the process were considered little if at all. If some of the fanciful, clean and painless castration devices that are described in some of the stories in the archive actually existed there would probably be many more voluntary eunuchs than there are now.

I've been wanting to have my totally atrophied, non-functional testicles removed, along with the scrotum, purely for aesthetic reasons, but cannot afford what would be, totally elective, cosmetic surgery. Unfortunately, there is no current neat, clean, safe way of doing it myself.:-\

I'm in total agreement with you on this. Animal castration devices are not the way to go. You shouldn't have to take a meat cleaver to yourself either....
Post Reply

Return to “Eunuch Central”